Skip to Site Navigation | Skip to Content

Infrastructure is Failing—But These Roadway Material Innovations Could Help

Infrastructure is Failing—But These Roadway Material Innovations Could Help

Researchers are developing new technologies for self-healing asphalt, pothole prediction, and more.

Architect Magazine
By BLAINE BROWNELL

Self healing asphalt contains small steelwool fibers that can be heated with induction energy to seal microcracks, extending the service life of the road.

‘Tis the season of the pothole—and a myriad of other problems to do with road infrastructure. Winter brings out the worst in pavement: Once water penetrates surface cracks, it expands as ice in freezing temperatures, weakening and displacing the surrounding asphalt. After thawing, the affected area remains a void for repeated water infiltration and freeze-thaw damage, eventually leading to larger cracks and potholes. According to the American Society of Civil Engineers’ (ASCE's) "2017 Infrastructure Report Card," U.S. roadways are suffering from these effects—so badly, in fact, the ASCE gave roadways a D-rating. “One out of every five miles of highway pavement is in poor condition and our roads have a significant and increasing backlog of rehabilitation needs,” the report reads. “After years of decline, traffic fatalities increased by 7 percent from 2014 to 2015, with 35,092 people dying on America’s roads.”

As a clear threat to public safely, these statistics beg the question—why aren’t roads being adequately repaired? The ASCE discloses that the federal government has been chronically underfunding highway maintenance, with a backlog today of $836 billion required for satisfactory upkeep. Thanks to the new GOP tax bill, an even more impoverished U.S. Treasury will likely exacerbate this funding backlog.

Material scientists are stepping in to help. A collection of new technologies promises to replace conventional bitumen with self-healing asphalt. For example, scientists at the Delft University of Technology in the Netherlands have created such a material by infusing asphalt with electrically conductive fibers and fillers in the configuration of closed-loop circuits. When a current is introduced near a crack, the heat generated within the circuits melts the bitumen and seals it. Similarly, researchers from ETH Zurich... FULL ARTICLE

No comments (Add your own)

Add a New Comment


code
 

Comment Guidelines: No HTML is allowed. Off-topic or inappropriate comments will be edited or deleted. Thanks.